RAPS-08-LED

LED Rapid Exit Taxiway Indicator

LED in-pavement rapid exit taxiway indicator light for airports CAT I, II and III, according to ICAO Figures A2-6 and A2-7. Installed along the runway centreline in advance of rapid exit taxiway intersections, the RAPS-08-LED provides pilots with an alternating yellow signal that indicates the location and direction of the upcoming exit. This allows the crew to plan the deceleration and turn-off at the optimal speed, reducing runway occupancy time and increasing runway throughput capacity.

AIRSAFE · RAPS-08-LED Green / White / Yellow

LED
Inset
Runway threshold
Runway centerline
Rapid exit (RETIL)
ICAO
FAA
EASA
STANAG

Data sheet

Standards and compliance

ICAOAnnex.14 Vol.1
FAAAC 150/5345-46
IECTS 61827
EASACS-ADR-DSN
STANAG3316
AENAPPT-013_03-1

Details and drawings

The RAPS-08-LED is a LED in-pavement rapid exit taxiway indicator light designed for airports up to CAT III, in compliance with ICAO Figures A2-6 and A2-7. With just 6 mm of profile above the pavement, a forged aluminium construction and IP68 ingress protection, it provides pilots with a clear yellow directional signal to identify and navigate rapid exit taxiways during the landing rollout.

The LED light source provides a minimum of 60,000 hours at maximum brightness and over 100,000 hours under normal operating conditions. Fully compatible with existing series circuits and available in uni-directional and bi-directional configurations, the RAPS-08-LED is a direct replacement for conventional halogen rapid exit taxiway indicators.

Complete the system

A series-circuit fixture never works alone: it is installed with a constant current regulator, one isolation transformer per fixture and its mounting. Ask for all of them in one quote.

CONSTANT CURRENT REGULATOR CCR-2100 Constant Current Regulator (CCR2100-AES) Options
ISOLATION TRANSFORMER ITF Isolation Transformatör Options
THIS FIXTURE
RAPS-08-LED LED Rapid Exit Taxiway Indicator
BASE CAN SB-08 Shallow Base (8 inch) Options

Transformer and mounting quantities follow the fixture quantity; you can change them on the quote list.

On the airfield

Runway threshold
Green lights across the start of the runway. For the pilot: the runway begins here.
Runway centerline
Inset lights every 15 m on the runway axis; red-white over the last 900 m, red over the last 300 m.
Rapid exit (RETIL)
Yellow lights beside the centerline ahead of a rapid exit taxiway (RETIL), counting down the distance to the exit.
Taxiway intersection
Yellow lights at taxiway intersections showing where to hold.