TR EN
Inset Runway End Light (LED) — RELS-12-LED

Airsafe Runway Lighting

RELS-12-LED

Inset Runway End Light (LED)

LED · I,II,III catogery airports runway edge light

AIRSAFE · RELS-12-LED White / Yellow / Red
CURRENT
2.8–6.6 A
POWER
36 VA
ICAO
Annex 14 A2-9 A2-10
FAA
L-850E
  • LED
  • Inset
  • Runway end
  • Runway edge
  • ICAO
  • FAA

Specifications

Product Model
RELS-12-LED
Type
In-pavement, Bi-direction, clear/yellow/red
Light source
LED
Rated power
36VA
Rated current
2.8~6.6A
Application
I,II,III catogery airports runway edge light
Minimum service life of light source at rate power
50000h
ICAO
Annex 14 A2-9 A2-10
FAA
L-850E

Standards and compliance

  • CAACAC-137-CA-2015-01
  • CAACAC-137-CA-2015-03
  • SAC: GB/T 7256
  • ICAOAnnex 14，Volume I
  • IECTS 61827
  • FAAAC 150/5345-46
  • FAAEB NO.67
  • NATOSTANAG 3316

Details and drawings

Features

  • LED is featured by long life, effective energy saving, maintenance free which brings enormous economic benefits
  • Proprietary prism structural design and manufacturing process to ensure excellent optical performance
  • Strict LED color management to ensure premium color consistency
  • Consistent dimming curve with halogen lamp fixture, complying with FAA standards
  • Proprietary driving circuit and thermal management solution, which greatly improves the reliability and service life of light fixture
  • Power factor above 0.9, minimizing the power network interference
  • Optional function of single lamp failure detection, which enables the light to be open as halogen lamp once LED fails
  • Specially-designed structure, protruding only 6.35mm above finish grade
  • Upper cover with flat out-light surface to prevent from water buildup and ensure high luminous efficiency
  • Upper cover with equal-strength design and forging craft, which has premium mechanical, barrier capacity, and shock resistance ability
  • Smooth upper cover without sharp edge to prevent aircraft tires from damaging
  • Main body of lighting fixture is made of high thermal conductive aluminum alloy, which ensures good heat dissipation performance
  • Main structure made of corrosion-resistant aluminum alloy with special anodizing treatment, all fasteners are made of stainless steel, suitable for harsh environment application
  • High-precision parts machining to ensure all dimensional quality and precision
  • IP68 Ingress protection-grade, that can withstand inner pressure of up to 138kpa or water pressure generated from aircrafts’ impact on the optical window
  • Interchangeable, modular-designed components, applicable for all series of 12-inch LED in-pavement runway lights(6 mm), which effectively cuts down the inventories.
Technical Data
Technical Data
Accessories
Accessories
Ordering Information
Ordering Information

Brochure

RELS-12-LED

Complete the system

A series-circuit fixture never works alone: it is installed with a constant current regulator, one isolation transformer per fixture and its mounting. Ask for all of them in one quote.

  1. CONSTANT CURRENT REGULATOR CCR-2100 Constant Current Regulator (CCR2100-AES) Options
  2. ISOLATION TRANSFORMER ITF Isolation Transformatör Options
  3. THIS FIXTURE
    RELS-12-LED Inset Runway End Light (LED)
  4. BASE CAN SB-08 Shallow Base (8 inch) Options

Transformer and mounting quantities follow the fixture quantity; you can change them on the quote list.

On the airfield

  • Runway end

    Red lights across the end of the runway.

  • Runway edge

    White lights along both runway edges, turning yellow over the last 600 m.

Other products for this position
Airport plan: runway, approach, taxiway, apron and helipad lights H 05 23 APRON TWR APPROACH RWY 05 / 23 SUB

From the same group

Runway Lighting · all

Popular: