TOEL-08-LED

Inset Taxiway Edge Light (LED)

LED in-pavement taxiway and apron light for airports CAT I, II & III, according to ICAO Annex 14 Part 5.3.18.8, FAA -L852T.

AIRSAFE · TOEL-08-LED Blue

CURRENT: 2.8–6.6 A
POWER: 3 VA
ICAO: Annex 14 5.3.18.8
FAA: L-861T

LED
Inset
Taxiway edge
ICAO
FAA
EASA
STANAG

Data sheet

Specifications

Product Model: TOEL-08-LED
Type: Inset, omni-direction, blue
Light source: LED
Rated power: 3VA
Rated current: 2.8~6.6A
Application: I,II,III category airports taxiway edge light
Minimum service life of light source at rate power: 50000h
ICAO: Annex 14 5.3.18.8
FAA: L-861T

Standards and compliance

CAACAC-137-CA-2015-01 & 03
SAC: GB/T 7256
ICAOAnnex 14,Volume I
IECTS 61827
FAAAC 150/5345-46 & EB NO.67
NATOSTANAG 3316
FAAAC 150/5345-46
EASACS-ADR-DSN
STANAG3316
AENAPPT-019_03-12

Details and drawings

The TOEL-08-LED is a low-profile LED in-pavement taxiway edge light designed for airport operations up to CAT III. With just 6 mm of profile above the pavement, a forged aluminium construction and IP68 ingress protection, it delivers reliable blue omnidirectional illumination in the most demanding airfield environments.

The LED light source provides a minimum of 60,000 hours of life at full brightness, with over 100,000 hours under normal operating conditions. Fully compatible with existing series circuit infrastructure and available in uni-directional and bi-directional configurations, the TOEL-08-LED is a direct replacement for conventional halogen in-pavement taxiway edge fixtures.

Features

The LED light is featured by long life, energy saving, maintenance- free, which brings enormous economic benefits to customers
Specially-designed LED lens to greatly improve luminous efficacy of LED lights
Proprietary prism structural design and manufacturing process to ensure excellent optical performance
Strict LED color management to ensure premium color consistency
Light distribution consistent with that of halogen lights, complying with FAA standards
Proprietary driver circuit and thermal management solution, which greatly improves the reliability and service life of light fixture
Power factor above 0.9, which minimizes the power network disturbance
Optional function of single lamp failure detection, which enables the light to simulate open circuit of halogen lamp when the LED light is damaged
Specially-designed structure, protruding only 6.35mm above finish grade
Upper cover with flat out-light surface to prevent from water buildup and ensure high luminous efficiency
Upper cover with equal-strength design and forging craft, which has premium mechanical and barrier capacity, and shock resistance ability
Smooth and sleek upper cover to prevent from damaging aircraft tires
Lighting fixture made of highly conductive aluminum alloy, which ensures good heat dispersion
Main structure made of corrosion-resistant aluminum alloy with special anodic oxidation treatment, all fasteners are made of stainless steel, suitable for harsh environment application
High-precision parts and components machining to ensure all dimensional quality and precision
IP68-grade, that can withstand inner pressure of up to 138kpa or water pressure generated from aircrafts' impact on the optical window
Interchangeable, modular-designed components, applicable for all kinds of 8-inch omni-directional in-pavement taxiway lights(LED type)

Brochure

TOEL-08-LED

Certificates

ICAO CAAC

Complete the system

A series-circuit fixture never works alone: it is installed with a constant current regulator, one isolation transformer per fixture and its mounting. Ask for all of them in one quote.