PAPI-300

Precision Approach Path Indicator (PAPI)

Precision Approach Path Indicator for airports CAT I, II & III according to ICAO annex 14 Vol.I. Figure A2-23

AIRSAFE · PAPI-300 White / Red

CURRENT: 2.8–6.6 A
POWER: 3 × 105 W
ICAO: Annex 14 A2-23
LIFE: 1000h

Halogen
Elevated
PAPI
ICAO
FAA
EASA
STANAG

Data sheet

Specifications

Product Model: PAPI-300
Type: Elevated, Uni-direction, clear/red
Light source: halogen lamp
Rated power: 3×105W
Rated current: 2.8~6.6A
Application: I,II,III category airports PAPI
Minimum service life of light source at rate power: 1000h
ICAO: Annex 14 A2-23

Standards and compliance

ICAOAnnex 14, Volume 1
FAAAC 150/5345-28
EASACS-ADR-DSN
STANAG3316
AENAPPT-020_04-12

Details and drawings

Features

Meet ICAO Annex 14 and FAA requirement onbrightness and color coordinate; dual-lens structure to obtain a narrower and straight red to white transition region.
Intelligent electrical control system force PAPI system turn off automatically when the failures of FAA and ICAO happen, and turn on the control system alarm due to the CCR under voltage.
LED digital tube on each fixture, display the elevation angle in real-time, resolution of ±0.01 (0.6 cent), the range of angel reach over 9.99 of vertical.
One step operate unit control box and display usual information remind on the panel, simple operation and easy to understand.
Compatible of operation mode and fly correction mode are more convenience to use.
Self checking system ensures the reliable and safety of system.
3*105W reflective lamps reach the half energy saving than traditional PAPI.
Set with communication module (purchase separately), easy to upload system data to the control system through PAPI conversion plate, PAPI gateway and CAN.
Triple leg vertical adjustment reaches both rough and meticulous adjustments of height, convenience and accurate install and adjust in real-time.
Unique system design of dual-lens structure and three individual light ways, accurately lamps and filters positioning device (optical and mechanical), no need to correct position again when change the lamps and filters.
Aluminum alloy material for light body, special processing on surface, all fasteners use high quality stainless steel material; make fixture ethereal, strong and good anticorrosion property.
Smaller volume for the light body, smaller wind-facing areaand wind load reach 161km/h.
Frangible coupling pass the precision machining and FAA standard, stable and reliable.

Brochure

PAPI-300

Certificates

ICAO CAAC

Complete the system

A series-circuit fixture never works alone: it is installed with a constant current regulator, one isolation transformer per fixture and its mounting. Ask for all of them in one quote.