Lattix® 4420

Passive safety mast for signs and all other types of road side information.

Complete mast includes:

• Aluminium top plate with bolts
• Mast 4420
• Foot plate with washers and bolts

Product specifications

Performance under vehicle impact (passive safety):

100-NE-B-R-SE-MD-0

(according to EN12767:2019)

The Lattix® 4420 mast system can be used as mast for sign support, other information and surveillance equipment or other applications. The mast is delivered as a complete assembly including mast, base plate and top plate.

The mast is tested and approved according to:

• EN 12899-1, Fixed, vertical road traffic signs
• EN 12767, Passive Safety of support of structures for road equipment

Full-scale impact crash tests and simulations have been performed according to EN 12767 at a speed of 35 km/h and 100 km/h with 3,9 m mast length. Simulations show that the mast will have equal performance up to 8,65 m length.

The mast is approved for maximal 8,65 m and minimal 1,8 m from the ground to bottom of sign. Due to the risk of the penetration of the windscreen of an impacting car, the untested reduced minimum height of the lower edge of the sign shall not be lower than 2,0 m. Lower installations may be used, but risk of windscreen penetration shall be evaluated.

The sign mounted to a single mast should not weigh more than 200 kg and needs to be dimensioned according to local wind loads.

All performance presumes sufficient foundation.

The Lattix® 4420 mast system can be coated (powder-coated) if desired.

Product data

Material / Surface treatment

Mast: EN-AW 6063 T66

Base plate: S355, Galvanized steel according to EN ISO 1461

Bolts: BUMAX 109

Data / Weight

Capacity

*) The moments do not take into account the partial material factor gm. EN 12899-1 gives a gm for aluminium of 1,15.

Accessories

The Lattix® 4420 mast is delivered fully-assembled with top plate and base plate if not specified differently.

Lattix® Element Masts can be delivered with accessories kits:

• top plates,
• base plates,
• foundations,
• sign clamps,
• cable covers,
• brackets for tunnel,
• connector plates
• etc.

Lengths

The Lattix® 4420 mast is produced in many standard lengths, but can also be produced in customized length if desired.